News

How To Choose A Suitable Dust Filter Bag

Jun 30, 2025 Leave a message

The filter bag is the core filter component of the bag filter, and its cost accounts for about 10% to 15% of the equipment cost. The choice of filter bag is not only related to the dust removal efficiency, but also directly affects the operating cost, service life and overall environmental protection effect of the equipment. When choosing a dust filter bag, you need to consider multiple factors, including operating temperature, humidity, gas composition, dust characteristics and operating conditions of the dust collector.

 

Gas temperature
Normal temperature gas (<130℃)

Under this condition, you can choose a normal temperature filter bag, such as a polyester needle felt dust filter bag. This type of filter bag performs well in a working environment of ≤130℃, and the instantaneous temperature can reach 150℃. It is suitable for cement plants, coal mines, steel plants and other industries.

 

Medium temperature gas (130℃-180℃)

You can choose PPS dust bag, PPS and PTFE blended filter bag. PPS bags have excellent chemical resistance and hydrolysis resistance, and are suitable for coal chemical industry, coal-fired power plants and other occasions.

 

High temperature gas (180-280℃)

For high temperature working conditions, high temperature filter bags need to be selected. 

 

Ultra-high temperature gas (>280℃)

Ultra-high temperature working conditions have extremely high requirements for filter bags. 

 

Gas humidity
For high-humidity gases (gas relative humidity is above 80%), when they are in a high temperature state, especially when the dust-containing gas contains SO2, gas cooling will produce condensation. This will not only cause scaling and clogging on the surface of the filter bag, but also corrode the structural materials, so special attention should be paid. In a high humidity environment, the dust filter bag needs to have good moisture resistance to prevent condensation and corrosion caused by moisture. You can choose materials with good moisture resistance such as PPS and PTFE.

 

Gas composition
Various furnace flue gases and chemical waste gases often contain a variety of chemical components such as acids, alkalis, oxidants, and organic solvents. If there are corrosive gases in the working conditions, you need to choose materials with chemical corrosion resistance, such as PTFE, PPS, etc. 

 

Send Inquiry