News

Five Key Requirements For Filter Media Selection

Aug 02, 2025 Leave a message

1. Physical properties

- Particle size uniformity: deviation must be less than 5% (such as ISO 3310-1 standard) to avoid short-flow phenomenon;

- Mechanical strength: wear rate should be less than 1% (refer to GB/T 17431-2010) to prevent breakage during operation;

- Density adaptation: the density of filter media in water treatment must be greater than 1.0g/cm³ to ensure sedimentation.

 

2. Chemical stability

- Acid and alkali resistance (pH tolerance range 2-12), antioxidant (such as activated carbon iodine value ≥800mg/g);

- No dissolution (such as heavy metal content must comply with GB 5749-2022 drinking water standard).

 

3. Economic and sustainable

- Service life ≥5 years (taking quartz sand as an example);

- Regeneration cycle (such as activated carbon thermal regeneration temperature needs to reach 600-800℃).

 

1

 

Send Inquiry